{{ post.title }}
글 편집
글 편집 (이전 에디터)
{{ post.author.name }}
작성일
펑션베이가 후원하는 제 8회 ACMD (The 8th Asian Conference on Multibody Dynamics)가 일본 카나자와에서 진행되고 있습니다. (8월7일~8월10일)
펑션베이에서는 ACMD 후원과 함께 홍보 부스를 운영하고 있습니다. 부스에 찾아오시면 MFBD 기술을 이용한 강체와 유연체로 구성된 시스템의 해석 및 RecurDyn X Particleworks를 이용한 동역학 모델과 CFD와의 연계 해석 사례 등을 직접 확인하시고, 기술 엔지니어와 상담을 하실 수 있습니다.
또한 ACMD를 등록하신 모든분들께 RecurDyn 로고가 새겨진 메모장과 볼펜도 제공하고 있습니다.
<ACMD 발표논문 리스트>
- Kinematic Analysis of Mechanisms using Velocity and Acceleration Diagrams (VAD) Module in MechAnalyzer Software
- An Efficient Contact Modeling and Simulation for the Ball Screw Multi-body System using a New Geo Sphere Contact in RecurDyn
- An Improvement of the Generalized Geometry Contact Algorithm for Modal Reduction Flexible Bodies
- Estimation of Human Motion Using Simplified Trunk Model
- Combination of component mode synthesis method and penalty method for contact-impact of flexible multi-body system
- A Study on the Variable Stiffness Method using Penetration Limitation in a Gear Contact
- Simulation Study on an Acceleration Control System for Semi-Active In-Car Crib with Joint Application of Regular and Inverted Pendulum Mechanisms
- Quasi-static panel deployment and retraction using electromagnetic force in satellite missions
- Attitude control system of a space membrane using electromagnetic torque
- Improved Contact Tracking Algorithm for the Omni Wheel in General Case of Roller Orientation
- Dynamic Simulation of Rigid Body System Driven by Electric Motor Considering Magnetic Saturation
- HILS system for the electric motor using coupling analysis with rigid body system and hydraulic system
- Kinematic Stability of Variable Cross-section Beam with Large Deformation by using the Absolute Nodal Coordinate Formulation
- Wear Behavior Analysis Using the Multi–mass Tire Model
- Steady State and Free Vibration Analysis of a 3D Rotating Euler Beam with Arbitrary Setting Angle
- Folding and Unfolding Properties of Extension Boom with Slide Fasteners for High Rigidity and Storability
- Level Set Based Topology Optimization of A Flexible Multibody Dynamic System Described by ANCF
- Effect of Inertia for Shaft Movement generated by a Golf Swing
- Numerical Approach to Modeling Flexible Body Motion with Large Deformation, Displacement, and Time-varying Length
- Report on Microgravity Experiments of Self-Deployable Truss Structure Consisting of BCON Booms
- Finite Element Method for Nonlinear Dynamics of Inclined Cable with Support Motion
- Relation between Posicast Shaper and Vibration Manipulation Function for Undamped 1DOF Linear Oscillator
- Study on the model reduction of the flexible multibody system described by the spatial gradient-deficient beam element of ANCF
- Similarity Rules for Spin Deployment Membrane
- Dynamics of a Space Manipulator: Relative vs. Natural Coordinates
- Determination of Deformation Limit of Fuel Assembly Guide Tubes of the VVER 1000 Nuclear Reactor
- Research on the Coupling Vibrations between Powertrain and Drive Axle for Front-engine Rear-drive Vehicle
- Development and Optimal Design of a Telescopic Boom Lift for Nursing Care Using a Multibody Dynamics Approach
- Optimal Control Based on Modified Genetic Algorithm for the Deployment Process of Scissor-type Deployable Mast
- Optimum Values of Circuit Used in Energy Harvesting Using Piezoelectric Elements or DC Motors
- Study on modeling and numerical analysis for the prediction of wheel wear development
- Fundamental Study on the Generation of Rail Corrugation Using Vehicle/Track Multibody Dynamics Simulation in Consideration of Track Stiffness
- Three-dimensional Flexural Vibration Model for Railway Vehicle Carbodies by using Multi Body System
- Jitter removal in KUKA KR-5 using Modified Kalman Filter while tele-operating with Exoskeleton
- A Novel Human-Like Foot Structure with Toes for Biped Robot
- Passive Balancing of a Novel 3-R Orientation Sensing Mechanism
- Mechanical stiffness control of a three DOF wrist joint that mimics the musculoskeletal system
- Five finger robot hand with a planetary gear system
- The Artificial Finger using The Double Planetary Gear System
- Dynamics and Control of Two-Mobile Modules of Climbing Robot Connected by a Manipulator
- Dexterous envelope grasping of Multi-Joint Gripper with Variable Stiffness Mechanism
- Motion planning of multi body robots using feedback control simulation under multiple physical constrains
- Motion Simulation of a multi-axle all-terrain vehicle with hydrostatic transmission in off-road conditions: mathematical control model
- Analysis of the automatic control system for multistage transmission with electro-pneumatic shifting
