{{ post.title }} 글 편집 글 편집 (이전 에디터) Author {{ post.author.name }} Posted on

The eighth ACMD 2016 (The 8th Asian Conference on Multibody Dynamics) sponsored by FunctionBay is held in Kanazawa, Japan.

FunctionBay runs a promotion booth in addition to the support for ACMD 2016. If you visit FunctionBay booth, you can visually verify analysis for mechanical systems that consist of rigid bodies and flexible bodies using MFBD technology and co-simulation between dynamic model and CFD(Computational Fluid Dynamics) using  RecurDyn X Particleworks and also consult wtih professional engineers.

We give away memo pads and to ballpoint pens with RecurDyn logo to all the registrants for ACMD 2016.

Go visit ACMD website <- Click

<ACMD : List of Papers>

1. Kinematic Analysis of Mechanisms using Velocity and Acceleration Diagrams (VAD) Module in MechAnalyzer Software
2. An Efficient Contact Modeling and Simulation for the Ball Screw Multi-body System using a New Geo Sphere Contact in RecurDyn
3. An Improvement of the Generalized Geometry Contact Algorithm for Modal Reduction Flexible Bodies
4. Estimation of Human Motion Using Simplified Trunk Model
5. Combination of component mode synthesis method and penalty method for contact-impact of flexible multi-body system
6. A Study on the Variable Stiffness Method using Penetration Limitation in a Gear Contact
7. Simulation Study on an Acceleration Control System for Semi-Active In-Car Crib with Joint Application of Regular and Inverted Pendulum Mechanisms
8. Quasi-static panel deployment and retraction using electromagnetic force in satellite missions
9. Attitude control system of a space membrane using electromagnetic torque
10. Improved Contact Tracking Algorithm for the Omni Wheel in General Case of Roller Orientation
11. Dynamic Simulation of Rigid Body System Driven by Electric Motor Considering Magnetic Saturation
12. HILS system for the electric motor using coupling analysis with rigid body system and hydraulic system
13. Kinematic Stability of Variable Cross-section Beam with Large Deformation by using the Absolute Nodal Coordinate Formulation
14. Wear Behavior Analysis Using the Multi–mass Tire Model
15. Steady State and Free Vibration Analysis of a 3D Rotating Euler Beam with Arbitrary Setting Angle
16. Folding and Unfolding Properties of Extension Boom with Slide Fasteners for High Rigidity and Storability
17. Level Set Based Topology Optimization of A Flexible Multibody Dynamic System Described by ANCF
18. Effect of Inertia for Shaft Movement generated by a Golf Swing
19. Numerical Approach to Modeling Flexible Body Motion with Large Deformation, Displacement, and Time-varying Length
20. Report on Microgravity Experiments of Self-Deployable Truss Structure Consisting of BCON Booms
21. Finite Element Method for Nonlinear Dynamics of Inclined Cable with Support Motion
22. Relation between Posicast Shaper and Vibration Manipulation Function for Undamped 1DOF Linear Oscillator
23. Study on the model reduction of the flexible multibody system described by the spatial gradient-deficient beam element of ANCF
24. Similarity Rules for Spin Deployment Membrane
25. Dynamics of a Space Manipulator: Relative vs. Natural Coordinates
26. Determination of Deformation Limit of Fuel Assembly Guide Tubes of the VVER 1000 Nuclear Reactor
27. Research on the Coupling Vibrations between Powertrain and Drive Axle for Front-engine Rear-drive Vehicle
28. Development and Optimal Design of a Telescopic Boom Lift for Nursing Care Using a Multibody Dynamics Approach
29. Optimal Control Based on Modified Genetic Algorithm for the Deployment Process of Scissor-type Deployable Mast
30. Optimum Values of Circuit Used in Energy Harvesting Using Piezoelectric Elements or DC Motors
31. Study on modeling and numerical analysis for the prediction of wheel wear development
32. Fundamental Study on the Generation of Rail Corrugation Using Vehicle/Track Multibody Dynamics Simulation in Consideration of Track Stiffness
33. Three-dimensional Flexural Vibration Model for Railway Vehicle Carbodies by using Multi Body System
34. Jitter removal in KUKA KR-5 using Modified Kalman Filter while tele-operating with Exoskeleton
35. A Novel Human-Like Foot Structure with Toes for Biped Robot
36. Passive Balancing of a Novel 3-R Orientation Sensing Mechanism
37. Mechanical stiffness control of a three DOF wrist joint that mimics the musculoskeletal system
38. Five finger robot hand with a planetary gear system
39. The Artificial Finger using The Double Planetary Gear System
40. Dynamics and Control of Two-Mobile Modules of Climbing Robot Connected by a Manipulator
41. Dexterous envelope grasping of Multi-Joint Gripper with Variable Stiffness Mechanism
42. Motion planning of multi body robots using feedback control simulation under multiple physical constrains
43. Motion Simulation of a multi-axle all-terrain vehicle with hydrostatic transmission in off-road conditions: mathematical control model
44. Analysis of the automatic control system for multistage transmission with electro-pneumatic shifting