{{ post.title }}
글 편집
글 편집 (이전 에디터)
{{ post.author.name }}
Posted on
| Version | {{ post.target_version }} | Product |
{{ product.name }}
|
|---|---|---|---|
| Tutorial/Manual | {{ post.manual_title }} | Attached File | {{ post.file.upload_filename }} |
Scenario is a function to use different simulation settings for specific time sections.
For example, if the entire simulation time is 12 seconds, you can use different solver parameters for 3 different sections; 0~4 sec., 4~8 sec., 8~12 sec. You can also activate or deactivate the specific force, contact or flexible body for each time section.
For example, with the above setting, the simulation from 0 sec. to 12 sec. is performed as below.
1) 0~4 sec.: Dynamic analysis is performed with the axial force, 'Axial1' inactive (deactivated)
2) 4~8 sec.: Dynamic analysis is performed with the axial force, 'Axial1' active (activated)
3) 8~12 sec.: Dynamic analysis is performed with the contact, 'SphereToSphere1' inactive (deactivated)
You can refer to the RecurDyn Help (at Analysis/Scenario) for the settings of Scenario.
(This link may be changed later. If you cannot access the Scenario page, please search 'Scenario' in RecurDyn Help.)
You can also find the related tutorial from the link below.
https://support.functionbay.com/ko/tutorial/single/57/professional-dipper-stick-bucket
