{{ post.title }}
글 편집
{{ post.author.name }}
Posted on
MBD for ANSYS 18.0: What's New
MBDforANSYS_18_WhatsNew_KOR (PDF)
MBDforANSYS_18_WhatsNew_ENG (PDF)
1. Load Transfer for 'Time interval'
- When doing Load Transfer, load conditions over time can be transferred using ‘Time interval’ option.
- Users can conduct static analysis at the several time instants conveniently.
- Similar to Quasi-static.
2. Use Reference Marker for Rotational Force and Translational Force
- The user can select an option to use a reference marker for rotational forces and translational forces.
- The user now can define the force relative to the arbitrary orientation.
- If the reference body is used, the force can be applied relative to the changing orientation over time.
3. Support coordinate system for origin and orientation
- The Coordinate System field allows the user to use a custom coordinate system for defining the joint or the force.
- User can reuse the coordinate system for the same position and orientation and make use of the convenient coordinate system toolbar for transformation.
4. Auto Generate Fixed Joints
- This tool can be used to automatically create fixed joints between any number of selected bodies.
- Some of the imported geometry may become multiple bodies even when the original solids were grouped into a single body. There is a need to regroup the bodies into a single merged body. This tool automates the grouping process and reduces the model preparation time.
5. Use Reference Marker for Initial velocity of MBD Body
- The user can select an option to use a reference marker for the initial velocity of MBD Body.
- The user now can define the initial velocity relative to the arbitrary orientation.
6. Others
- The MBD for ANSYS tutorials provide a hands-on setting for learning how to use the software within the ANSYS Workbench environment. The table below shows the areas of emphasis for each tutorial
- Technical support site can be accessed from the toolbar directly.
